Table of Contents
Advertisement
Flowchart for Sailing -- Continued
The sequel from the
pre-page
Route monitoring
("Arrived at WPT" alarm
occurs when arrived at the
WPT.)
It repeats itself until the
ship arrives at the last
WPT before the final
destination.
Arrived at the final destination
("Arrived at LAST WPT" alarm
occurs.)
Unload the route
End of sailing
• When the ship crosses a waypoint boundary, there will be an updated next
WPT, and an "Arrived at WPT" alarm occurs.
After confirming the alarm contents, press the [ALARM ACK] key on the
operation panel or the [Alarm Acknowledgement] button on the display
panel to stop the alarm.
[Alarm Acknowledgement] button
When the ship exceeds the boundary of the final destination, "Arrived at
LAST WPT" alarm will occur.
After confirming the alarm contents, press the [ALARM ACK] key on the
operation panel or the [Alarm Acknowledgement] button on the display
panel to stop the alarm.
Select "UNLOAD". Then the route selected disappears from the screen.
3-19
3 Basic Operation of ECDIS
ECDIS
Advertisement
Table of Contents
