Alarm Function - JRC JAN-701B Instruction Manual

9.1 Alarm Function

(1) No Alarm
Category*1 Message*2
No Alarm No Alarm
(2) System Alarm
Category*1 Message*2
No.1 POSN 1(Data)
Position
Data Alarm
POSN1 not fix
POSN1(NON-WGS84)
No.2 POSN 2(Data)
Position
Data Alarm
POSN2 not fix
POSN2(NON-WGS84)
No.1 POSN1 shifted
Position Shift
Alarm
Position Position difference
Difference exceed
Alarm
Radar Data PROC(AZI)
Alarm
PROC(HL)
PROC(Trigger)
PROC(Video)
RIB(Data)
PROC(Reverse)
PROC(INT)
ASIC1 to Radar
Target Track TT(Data)
Data Alarm
SRB Data SRB(Data)
Alarm
GYRO Data Gyro I/F(Gyro)
Alarm
Heading(Data)
LOG Data Gyro I/F(Log)
Alarm
Log(Data)
Autopilot Autopilot(DATA)
Data Alarm
Hardware Fan(CPU)
Alarm
CPU High Temperature
Fan(Main PWR)
Fan(ATX PWR)
Fan(LCD)
Disk1 Error
Disk2 Error
AC offline
9 Reference
Alarm
Alarm Type*3
Colour*3
Normal State Green
Alarm
Alarm Type*3
Colour*3
Alarm
Red
Alarm Red
Alarm Red
Alarm
Red
Alarm
Red
Alarm
Red
Alarm Red
Alarm Red
Alarm
Red
Alarm Red
Alarm Red
Alarm Red
Alarm
Red
Alarm
Red
Alarm
Red
Alarm Red
Alarm Red
Alarm
Red
Alarm
Red
Alarm
Red
Alarm Red
Alarm Red
Alarm
Red
Alarm Red
Alarm Red
Alarm
Red
Alarm
Red
Alarm
Red
Alarm Red
Alarm Red
Alarm Red
9-2
Buzzer Type*4 Meaning*5
Silent No Alarm
Buzzer Type*4 Meaning*5
System Alarm POSN1 (primary) is defective or
communication line is cut.
System Alarm POSN1 is not fixed.
System Alarm Geodetic system between chart and
measured position information being
received differs.
System Alarm POSN2 (secondary) is defective or
communication line is cut.
System Alarm POSN2 is not fixed.
System Alarm Geodetic system between chart and
measured position information being
received differs.
System Alarm The shift amount of the primary
position exceeds the limit being set.
System Alarm The difference between the primary
and second positions exceeds the
limit being set.
System Alarm Rotation signal (BP) is out of
specifications.
System Alarm Rotation signal (BZ) is out of
specifications.
System Alarm Trigger signal is out of specifications
or signal line is cut.
System Alarm Video signal is out of specifications.
System Alarm Error occurred in the radar interface
board.
System Alarm Error by reverse-rotation in the signal
processing part.
System Alarm Error in interrupting of stun in the
signal processing part.
System Alarm Error in interrupting from ASIC1 to
radar DSP
System Alarm Target Track is defective or signal
line is cut.
System Alarm Error occurred in the serial relay
board
System Alarm Gyro is defective.
System Alarm Error occurred in the heading data of
gyro interface or its line is cut.
System Alarm Log is defective.
System Alarm Error occurred in the log data of log
interface or its line is cut.
System Alarm Autopilot is defective or
communication line is cut.
System Alarm CPU fan is defective.
System Alarm CPU temperature is rising.
System Alarm Main power supply fan is defective.
System Alarm ATX power supply fan is defective.
System Alarm LCD fan is defective.
System Alarm Disk1 is defective.
System Alarm Disk2 is defective.
System Alarm AC power is offline.
Condition*6
Condition*6
Position measuring
instrument is
connected
(including DR).
Position measuring
instrument is
connected
(including DR).
User setting
User setting.
Position measuring
instrument is
connected to
POSN2
(including DR).
During radar
display
During TT
display
Always
Gyro is
connected.
Log is
connected.
Autopilot is
connected.
Always