Editing A User Map - JRC JAN-701B Instruction Manual

Hide thumbs Also See for JAN-701B:

Table of Contents

5.3.2.2 Editing a User Map

Follow the procedure below to edit an existing user map.

(1) Starting User Map Editing mode

1) In the normal menu

Select [MENU] - [(5) User Map] - [(3) User Map Editor] in that order.

(2) Opening a user map file

1) Left-click on the [Open] button.

In the User Map Editing menu

Select [MENU] - [(1) File] - [(2) Open] in that order.

The "Open Chart File" panel will be displayed.

2) Select the name of a file you wish to open, and then left-click on the [OK] button.

The selected user map file will be displayed.

Entering objects

1) When you use EBL/VRM to enter objects, make sure that [(4) Use EBL/VRM] is turned on

(checked). If you do not use EBL/VRM when editing a map,

In the User Chart Editing menu

Select [MENU] - [(2) Edit] - [(4) Use EBL/VRM] in that order.

[(4) Use EBL/VRM] is turned off (remove a checkmark).

2) Proceed to 5.5 "Entering Objects" and enter objects.

• After obtaining objects, follow the procedure described in (4) below to save a user map file.

5 Chart Editing

If using EBL/VRM: Check it.

If not using EBL/VRM: Uncheck it.