Switching The Range (S-57/C-Map Only) - JRC JAN-701B Instruction Manual

3.5.3 Switching the Range (S-57/C-MAP Only)

You can switch the range of the chart using the drop-down list on the display panel.
(1) Switching the range using the display panel
1) On the display panel
Left-click the range switching drop-down list .
2) Left-click the range in the list. The color of indicator left side of range switching drop-down list
changes green.
The chart is zoomed in or out according to the range you have selected.
This indicator lights up
when Range is valid.
3 Basic Operation of ECDIS
Range drop-down list
Zoomed out
Zoomed in
3-62