Table of Contents
Advertisement
(4) Saving a user map file
When saving a file without changing its file name (using the [Save] button):
1) Left-click on the [Save] button.
In the User Map Editing menu
Select [MENU] - [(1) File] - [(5) Save] in that order.
2) Left-click on the [Close] button to exit User Map Edit mode.
When saving a file under a different name (using the [(6) Save As] menu):
1) In the User Map Editing menu
Select [MENU] - [(1) File] - [(6) Save As] in that order.
The "Save as" panel will be displayed.
2) Enter a file name (using up to 8 characters) and a comment.
3) Left-click on the [SAVE] button. The panel closes.
The "Datum Conversion" panel opens.
Select [Select Datum] or [Enter Offset] to execute datum conversion or offset entering.
• [Select Datum]:
You can convert an object datum from [Source Datum] to [Destination Datum].
• [Enter Offset]:
You can specify offset (latitude/longitude) of the object and move the object.
4) Left-click on the [OK] button. The panel closes.
5) Left-click on the [Close] button
User Map Edit mode ends.
5-15
ECDIS
5 Chart Editing
Advertisement
Table of Contents
