Operation When Editing User Map - JRC JAN-701B Instruction Manual

5.3.2 Operation when Editing User Map

File operations are different when you create a new user map and when you edit an existing user map.
This section describes operations in both cases (descriptions follow 5.3.1 "Flow of User Map Edit"). This
section also describes how to merge user map and how to import user map files.
• Creating a new user map -> See Section 5.3.2.1.
• Editing a user map -> See Section 5.3.2.2
• Merging user map -> See Section 5.3.2.3
• Importing user map -> See Section 5.3.2.4
Note:
The maximum of the object is 20,000. ("Simple Line", "Warning Line", "Polygon", "Warning Area"
counts 1 top as one.) When adding beyond 20000, the "Max Point" notice occurs and it isn't possible
to do the addition of the object.
5.3.2.1 Creating a New User Map
Follow the procedure below to create a new user map.
(1) Entering the Map Editing mode
1) In the normal menu
Select [MENU] - [(5) User Map] - [(3) User Map Editor] in the order.
How to exit the user map editing mode:
Left-click the [Close] button. Alternatively, in the User Map Editing menu, select [(1) File] - [(0) Exit
from User Map Editor] in that order.
- When you open the Map Editing menu, rotate the trackball to move the cursor on upper part of
screen.
Then, the Map Editing menu title bar opens. To close it, or left-click any position on the map.
[Map Editing Menu]
(2) Opening a new user map file
1) Left-click the [New] button.
In the User Map Editing menu
Select [MENU] - [(1) File] - [(1) New] in that order.
5-11
ECDIS
5 Chart Editing