Opening The Ais/Tt List - JRC JAN-701B Instruction Manual

Hide thumbs Also See for JAN-701B:

Table of Contents

3.3.9.2 Opening the AIS/TT list

Note that the items "Bearing", "Distance", "CPA" ,"TCPA" in the table are the filtered value by the

AIS/TT settings. （See 3.33.1 "AIS/TT Setting "）.

1) In the normal menu

Select [MENU] - [(1) AIS/TT] - [(6) All List] in that order.

In the Table Editing menu, Graphic Editing menu, User Chart Editing menu

Select [MENU] - [(3) AIS/TT] - [(6) All List] in that order.

The "All List" panel opens.

2) Perform the following operation.

• Left-click one of the tabs, to open the "TT1" or "TT2" or "AIS" list.

When you opened "AIS" tab, the [View AIS Detail] becomes active.

Left-click the [Close] to close the "All List" panel.

3) AIS Filter

• It is displayed according to the display range item which was set in AIS filter.

（See 3.33.1 "AIS/TT Setting "）.

3 Basic Operation of ECDIS