Table of Contents
Advertisement
3) Mode change caused by the operation:
In the following cases, the motion/azimuth mode will be automatically changed from the current mode to
another one.
• From [True] mode to [Free] mode:
- When the own ship goes exceeding the display limit of the screen.
- When a chart where the ship does not exist is displayed by loading a new chart, including by means
of the [Port List] on the display panel.
• From [Relative] mode to [Free] mode:
- When the chart is scrolled.
- When a chart is loaded, including by means of the [Port List] on the display panel.
• From [Free] mode to [True] mode:
- When the [Home] is left-clicked.
The [Rotation] made in [Free] mode is retained if the mode is changed over to [True].
Note:
• [Course Up/WPT Up/Rotation] is valid only the chart scale is not lower than 1/5,000,000.
3 Basic Operation of ECDIS
3-68
Advertisement
Table of Contents
