Table of Contents
Advertisement
How to shift the chart during entering WPTs:
Left-click on the chart and hold the button down, and then move the cursor to scroll the chart
while entering WPTs.
2) Terminating WPT entry:
Left-click twice quickly to terminate WPT entry. (You can also terminate the operation by
selecting [Abort] in the shortcut menu after right-clicking.)
[Left-clicking twice quickly to stop entry]
Note:
• If a waypoint is located in a position other than an active chart when using ARCS and if another
panel exists at that position, then the panel display will change automatically.
Creating routes using EBL/VRM:
In the Graphic Editing menu
Select [MENU] - [(2) Edit] - [(1) Use EBL/VRM] in that order.
The EBL/VRM intersection becomes an entering position instead of a cursor.
First, left-click on the center of
EBL/VRM.
4 Route Planning
[The route you have entered]
Entering position
Line drawn from
the previous WPT
Then, decide where the EBL/VRM
intersection will be and left-click on it.
4-42
Advertisement
Table of Contents
