Analog Correct Value - JRC JAN-701B Instruction Manual

7.14 Analog Correct Value

This function revises the Analog Correct Value, for example Engine RPM.
1) Select [MENU] - [(1) Serviceman] - [(3) Installation] - [(3) Analog Correct Value] in that order.
The [Correct Value] dialog box will be displayed.
2) Select the sensor, input a correct value to each parameter column.
選択可能な項目：
・ M/E RPM STBD：Revolution per minute of Main Engine（Starboard）
・ M/E RPM PORT：Revolution per minute of Main Engine（Port）
・ Propeller RPM STBD：Revolution per minute of Propeller（Starboard）
・ Propeller Pitch PORT：Propeller Pitch（Port）
After inputting all the parameter, push the Set button to determine that, push the OK button.
Then, [Correct Value] dialog box will be closed.
7-19 7 Tools and Setting/Serviceman Menu
ECDIS