Table of Contents
Advertisement
3.3.7 How to Release the Alarm ([ALARM ACK])
When the alarm occurs, the buzzer sounds and the alarm contents are displayed in the alarm display
area on the display panel to notify the operator of an alarm. When more than one alarm occurs, it changes
an alarm display every second.
After confirming the contents of the alarm, press the [ALARM ACK] key on the operation panel or
left-click the alarm acknowledge-button on the display panel to acknowledge the alarm. When confirming
an alarm, the buzzer sound stops and the alarm display disappears from the alarm acknowledge-button.
However, until the cause of the alarm is removed, in the alarm display area, the alarm maintains a
displayed condition.
[Alarm List] button displays the alarm record which occurred recently. When you want to see the alarm
which occurred in the past, it chooses "Logbook" from the menu. (See 3.26 "Logbook")
The alarm acknowledge-button
The alarm display area
Memo: For alarm settings, see 7.10 "Setting the Alarm Options".
(1) When no alarm is found
If no alarm is found, the alarm display area displays [No Alarm].
Nothing is displayed here.
Displaying [No Alarm]
(2) When an alarm occurs
An alarm is displayed at the alarm acknowledge-button and in the alarm display area and the alarm
sound sounds.
Displaying the alarm
Blinking every 0.5 seconds
Displaying the alarm
3 Basic Operation of ECDIS
3-30
[Alarm List]
botton
Advertisement
Table of Contents
