JRC JAN-701B Instruction Manual page 207

Hide thumbs Also See for JAN-701B:

Table of Contents

Button Operation (left-click the button):

The "Logbook Setting" panel opens. You can set the filtering conditions. For

logbook option settings, see the next 3.26.2 " Logbook Setting".

[Column Setting]:

You can select any item in the list. Left-click the item to turn it ON or OFF.

The check mark (✔) shows that the selected item is set to ON. Selected

column and [Up] or [Down], The column changes the order in table of

"Logbook" panel

Column list is as follows:

・ Heading(°)

・ Av. Speed 4h(kn)

・ Av. Speed 24h(kn)

・ Voyage DIST.(G)(NM)

・ Voyage DIST.(W)(NM)

・ Charts, Set(°), Drift(kn)

・ Wind Dir. (°)

・ Wind Speed(m/sec)

・ Wave Dir. (kn)

・ Wave Height(m)

・ Air Press Temp.(hPa)

・ Temp(℃), Water Temp.(℃)

・ Engine Rev.(rpm)

・ Wave Height(m)

・ Air Press .(hPa)

・ Air Temperature (℃)

・ Water Temperature.(℃)

・ Engine Rev.(rpm)

Following column can not move:

[OK] : It saves setting contents.

[Cancel] : It cancels setting contents.

3 Basic Operation of ECDIS