Table of Contents
Advertisement
12.2 View of Each Information
12.2.1 View of Navigation Information
This section describes the screen configuration and displayed items of the block that displays navigation
information.
(1) Course Bar Block
1)
2)
3)
4)
5)
1) Planned Course
The course in the navigation plan that was programmed into the ECDIS system is displayed by
the ▼ mark.
2) Gyro (Gyro course)
The ship's heading according to the gyro compass is displayed.
3) Course
The course from GPS is displayed.
4) CTS (Course to steer)
When the route tracking mode is selected in the ECDIS, the course used for automatic sailing is
displayed by the ▲ mark.
5) ROT (Rate of turn)
The rate of turn per minute is displayed.
The full span value of the displayed graph can be set to 30, 60, 90, 120 or 150 degrees/minute
from the "Setup" panel.
*1 ROT is displayed when this information is sent from the gyro compass.
12 Display and View of Multi Window
*1
12-4
3)
1)
4) 2)
5)
Advertisement
Table of Contents
