JRC JAN-701B Instruction Manual page 47

Note:
The following item can change setting in menu [Main]-[Sensor].
・ Heading Sensor: It chooses from the connected equipment or manual setting.
・ STW Sensor: It chooses from the connected equipment or manual setting.
・ POSN1 (Primary sensor): It chooses from the connected equipment or Dead Reckoning.
・ POSN2: It isn't reflected in the display panel. POSN2 can set like POSN1, or unused.
・ Date and Time Sensor: It chooses from the connected equipment or manual setting.
・ Time Zone Sensor: It chooses from the connected equipment or manual setting.
The following table shows the relation of the sensor name of the display panel to the sensor setting
by POSN1.
POSN1 Sensor
Setting
DGPS1
DGPS1
DGPS2
DGPS2
GPS-Compass
Loran-C
DR
2) CTS / Vector Time / Water Depth
CTS (Course to Steer):
It is displayed direction azimuth to be sending to Auto Sailing system.
It is displayed during Automatic Sailing.
Depth:
It displays water depth and the standard position from the Depth sensor.
The kind of the standard position: Transducer, Surface, Keel.
Input data Display name on
COG and SOG
GPS (GPS)
Differential GPS (GPS)
GPS (GPS)
Differential GPS (GPS)
GPS-Compass (GPS)
Loran-C (Loran)
(Dead Reckoning) (DR)
Vector time:
It is displaying time for vector length; Ground-referenced
velocity and Water-referenced velocity.
Vector time can be set on menu [(4)Own Ship/Track] -
[(0)Setting].
2-9
Display name on
position
GPS1
DGPS1
GPS2
DGPS2
GPS-C
LORAN-C
DR
2 Names and Functions
ECDIS