Table of Contents
Advertisement
(2) 2-Step Operation
1) Right-Click on the chart and select [Dropped EBL/VRM] - [EBL1/VRM1] from context menu.
Then, EBL1 is displayed and its base point is displayed on the cursor.
2) Move the cursor and left-click at the position you want. Then, the base point is fixed.
At the same time, EBL1 bearing is changed with the cursor.
3) Move the cursor and left-click at the bearing you want. Then, EBL1 bearing is fixed.
At the same time, VRM1 is displayed and VRM1 distance is changed with the cursor.
4) Move the cursor and left-click at the distance you want. Then, VRM1 distance is fixed.
Select
[Dropped EBL/VRM]
- [EBL1/VRM1]
3.15.2.3 Dropped EBL/VRM – EBL1 (EBL2)
The following description is an operation to draw EBL1. Drawing EBL2 becomes a similar operation.
1) Right-Click on the chart and select [Dropped EBL/VRM] - [EBL1] from context menu.
Then, EBL1 is displayed and its base point is displayed on the cursor.
2) Move the cursor and left-click at the position you want. Then, the base point is fixed.
At the same time, EBL1 bearing is changed with the cursor.
3) Move the cursor and left-click at the bearing you want. Then, EBL1 bearing is fixed.
3.15.2.4 Dropped EBL/VRM – VRM1 (VRM2)
The following description is an operation to draw VRM1. Drawing VRM2 becomes a similar operation.
1) Right-Click on the chart and select [Dropped EBL/VRM] - [VRM1] from context menu.
Then, VRM1 is displayed and its base point is displayed on the cursor.
2) Move the cursor and left-click at the position you want. Then, the base point is fixed.
At the same time, VRM1 distance is changed with the cursor.
3) Move the cursor and left-click at the distance you want. Then, VRM1 distance is fixed.
Left-Click
Left-Click
Left-Click
3-107
3 Basic Operation of ECDIS
ECDIS
Advertisement
Table of Contents
