Table of Contents
Advertisement
(4) Making a route
1) Left-click the "LATatitude" and "LONongitude" in the position column, and enter the position for
W000.
2) Left-click the next WPT No. (i.e., W001).
Then, the same position as the previous WPT (i.e. W000) is automatically set in the position
column. Also, default values are displayed in the other columns.
WPT can be made up to 511.
Position:
Latitude/Longitude
XTL PORT: Port side width
XTL STBD: Starboard side width
ARR RAD:
Arrival radius (This item isn't displayed in the TCS setting.)
SPD [kn]:
Ship's speed
Sail RL/GC: Sail RL (Rhumb line)/GC (Great circle)
ROT [°/min]: The ship's rotation over every 1 minute (This item is automatically computed.)
Turn RAD:
The turning radius
Time Zone: Time zone
Name:
Comment entry column.
The contents of column are changed by left-clicking the [Name] drop-down list
button and then [Name], [WPT to WPT], or [Total].
Name:
WPT to WPT: The Name column changes as follows:
Total:
You can enter a comment.
The Name column changes as follows:
4-17
CRS: Course to the next WPT
DIST: Distance from waypoint to
waypoint
TTG: Estimated time required from
waypoint to waypoint
CRS: Course to the next WPT
DIST: Total distance from waypoint 0
to the specified waypoint
ETA: Total time from waypoint 0 to
the specified waypoint
4 Route Planning
ECDIS
Advertisement
Table of Contents
