Table of Contents
Advertisement
3.34 AIS/TT Setting
3.34.1 AIS/Target Track Setting
1) In the normal menu
Select [MENU] - [(1) AIS/TT] - [(0) AIS/TT Setting] in that order.
In the Table Editing menu, Graphic Editing menu
Select [MENU] - [(3) AIS/TT] - [(0) AIS/TT Setting] in that order.
The "AIS/Tracking Target Setting" Option panel opens.
2) Left-click the setting items to set them ON/OFF, and, for the items that require value entry, enter
the value. Left-click the [OK] to close the panel.
Note:
• For details on each setting item, refer to the "INSTRUCTION MANUAL for TT/AIS" to be used.
AIS/TT Past Position:
AIS/TT past position can be displayed
in the set interval.
[0.5min] [1min] [2min] [3min] [4min]
[0.1NM] [0.2NM] [0.5NM] [1NM]: It
displays in the set interval.
Display TT Vector:
It displays TT Vector
when putting check.
Target Number:
<AIS>
[OFF]:
Label is not displayed
[ON]:
Display only label of Activated AIS Target
[AIS Track]: Display only label of target to which route is displayed
[ship's Name]:AIS Target name is display
<TT>
[OFF]:
Label is not displayed
[ON]:
Displays a label.
[TT Track]: Display only label of target to which route is displayed
CPA/TCPA Limit:
It becomes valid when setting [AIS CPA/TCPA Alarm] to
[ACT]. Alarm is occurred when the target enters in each
setting range.
・CPA (Closest Point of Approach) is distance between
own ship and target. CPA Limit setting range: 0.1 - 9.9NM
・TCPA (Time to Closest Point of Approach) is time to own
ship and CPA of target. TCPA Limit setting range: 1 –
99min
3-187
AIS Lost Alarm
[OFF]: "Lost Alarm" not effect
[ACT&Danger]:
Active target and Danger target
[Danger]:
Danger target only
AIS CPA/TCPA Alarm:
[ACT]: Active target only
[ACT & Sleep]:
Active target and Sleep target
AIS Filter:
Refer to "3) AIS Filter"
3 Basic Operation of ECDIS
ECDIS
Advertisement
Table of Contents
