Table of Contents
Advertisement
• Voyage
1) Rudder (actual rudder angle)
The actual rudder angle is displayed. Single-shaft rudder angle or double-shaft rudder angle is
selected from the initial screen.
2) [Docking/Voyage] switching button
This button can be clicked to change from the Docking screen to the Voyage screen and vice
versa.
3) Pitch
The degree of pitch is displayed.
Nothing will be displayed if this unit is not connected to a pitching sensor.
4) Trim
The average of the pitching value over ten minutes is calculated and displayed.
Nothing will be displayed if this unit is not connected to a pitching sensor.
5) Roll
The degree of roll is displayed.
Nothing will be displayed if this unit is not connected to a rolling sensor.
6) Heel
The average of the rolling value over ten minutes is calculated and displayed.
Nothing will be displayed if this unit is not connected to rolling sensor.
7) STW (speed through water)
The STW from a Doppler sonar or the EM log is displayed.
8) Speed (ground speed)
The ground speed from the GPS is displayed.
*2 The value is shown by * if the speed became the ground speed.
*2
12-9
12 Display and View of Multi Window
Conning Display
Advertisement
Table of Contents
