10.5.4 Hardware Key Information
This function is useful for confirming User Permit No. and PIN No. And, information can be saved on the
floppy disk.
These information will be needed as purchasing ARCS chart and S-63 chart.
●How to Confirming / Saving Hardware Key Information
1) Left-click [Hardware Key Information] in User Maintenance menu.
Then, the "Hardware Key Information" panel is display.
2) Insert an empty disk into the floppy disk drive.
3) Left-click the [Save to FD]
Then, save to floppy disk is started.
Note:
• Do not remove a floppy disk from the floppy disk drive when the access lamp is on.
4) When save is completed, left-click the [Close] to close the "Hardware Key Information" panel.
Each information is displayed
here.
[Close]
Close this panel.
[Save to FD]
Hardware key information can
be saved on the floppy disk.
10-13
10 Maintenance and Inspection
ECDIS