Table of Contents
Advertisement
Remarks:
*1: Category
*2: Message (detailed description of alarm)
When an alarm occurs, the alarm button blinks in red. At the same time, the detailed description
of the alarm is displayed in the message box at the bottom of the chart display area. When the
Alarm button on the operation panel is pressed to acknowledge the alarm, the blinking alarm
stops and stays lit.
The following table shows the alarm display on the button, in the message box and the "Alarm
List" panel. The "Alarm List" panel opens when the [Alarm List] button is left-clicked.
Alarm button
Alarm display
[Alarm buttons on the display panel]
Attribution
Not acknowledged
Alarm
Acknowledged
Invalid Information
Information with low integrity/ Warning
Normal State
*3: An alarm shown in the "Alarm List" panel.
*4: Audible sound from the dedicated keyboard. The sounding pattern varies with the type of alarm.
Volume of the alarm is changeable every type. ([(7)Main] – [(0)Setting] – [(0) Buzzer Setting])
*5: [A]: Alarm used for TCS only, [V]: Alarm detected by the danger detection vector (vector area),
[S]: Alarm detected by the guard ring (sector area)
*6: Condition to detect an alarm may depend on the hardware to be used.
9 Reference
[Alarm List] button
Button/Panel
/Buzzer
Alarm button
Red blinking
Not indicate
Blue blinking
Not indicate
Stay green
Alarm
Icon on Status
display
of "Alarm List" panel
Stay red
Red blinking
Stay red
Stay red
Stay blue
Stay blue
Stay yellow
Stay yellow
Stay green
-
9-6
Icon on Log
Buzzer
of "Alarm List" Panel
Red blinking
Generated
Stay red
Silent
Stay blue
Generated
Stay yellow
Silent
-
Silent
Advertisement
Table of Contents
