Preparing A Controller; Adjusting The Camera - Omron FH-1 series User Manual

Preparing a Controller

No special preparations are required with this Controller because processing items are pre-installed.
Please check that the Controller is turned On and that the Main Window is displayed.
For details, refer to
The first time the program is started, the Language Setting Dialog Box is displayed. Select the language.
Reference: Selecting Language [Startup Settings] (p.277)

Adjusting the Camera

Check the images that are being taken.
Adjust the position of measurement objects and the focus of the lens.
1
Click the upper left corner of the Image Pane, and then select [Image mode] − [] − [Through].
The through image from the Camera is displayed in the Image Pane.
Reference:
2
Adjust the position of measurement objects so that they display
at the center of the monitor.
3
Adjust the focal distance of the lens.
Note
• If a Camera is used together with a lens, turn the focus ring on the lens to adjust the focus.
Refer to Lens Adjustment Setting in the Vision System FH/FZ5 Series Processing Item Function Reference
Manual (Cat No. Z341).
IMPORTANT
Check the model and serial number.
78
Preparing the Controller and Cameras
the Vision System FH/FZ5 series Hardware Setup Manual (Cat. No. Z366).
Arranging the Window Display (p.100)
Model
Serial number
When using a Compact Digital Camera, check that the model
and serial number of the Camera Head and Camera Amplifier
match. When a Camera Head and Camera Amplifier with
different models and serial numbers are connected, they may
not operate correctly.
Adjusting the Position of
the Measurement Target
Vision System FH/FZ5 Series
User's Manual (Z365)