Omron FH-1 series User Manual page 198

6
Select the sensor controller's project from [Select a sensor controller's project].
Select the Sensor Controller's project on the [Folder selecting] window with clicking [...] in [Select a sensor
controller's project].
The version and note of the Sensor Controller of selected the sensor controller's project is displayed in
the information view.
Selected Version information and Note are displayed in the information display label.
7
Click [Execute] button.
Starts to load the setting data including the
selected sensor controller project in Step 6.
The following screen is displayed.
If an error occurs during this process, refer to
below.
Reference: Troubleshooting (p.197).
IMPORTANT
Do not turn off the power, or disconnect the external memory device during the loading of the sensor controller project.
Doing so may cause damage to the external memory, or the sensor controller project.
8
The following confirmation dialog box is
displayed when the loading is finished.
Restarting the Sensor Controller is required to
apply the loaded settings
9
The following [Confirm] dialog is
displayed. Click the [OK] button to
restart the Sensor Controller.
196
Backing up Sensor Controller setting data (Configuration copy) Vision System FH/FZ5 Series
User's Manual (Z365)