Omron FH-1 series User Manual page 348

Arc
• Image selection status
Points are displayed on two lines at
both ends of the arcs, on the inner
arc, on the outer arc, and inside the
closed arc shape.
• Example) When enlarging an arc
Drag the point inside the arc outward.
• Example) When changing the angle of
arc (part that is open)
Drag one of the points at the end of the arc.
• Using numbers for setting
The window for settings is split into three. Setting is performed through input of numbers or through
tapping on the arrows.
346
Setting Figures
• Dimension Adjustment
Drag the points.
• Example) When adjusting the width of
an arc
Drag a point on the inner or outer arc inward
or outward.
Vision System FH/FZ5 Series
User's Manual (Z365)