Checking System Information [System Information] - Omron FH-1 series User Manual

Checking System Information [System Information]

The Controller model and measurement application version can be checked.
You can check the external memory status only on the FH series and the FZ5-1100 series.
Reference: Using External Memory Devices (FH series/FZ5-1100 series only) (p.224)
Additionally, you can use a Firmware upgrade tool. Make sure to contact you OMRON your OMRON
representative.
Note
Firmware upgrade tool is a software what is used when change the version of the measurement application soft. For the
update, need to USB memory or SD memory card to save the data.
1
In the Main Window, select [System
information] from the [Function] menu.
The [System information] dialog box is displayed.
2
The following information can be
checked.
• Sensor Controller model
• Version of measurement application
OS version of Sensor Controller

About [Drive information] button
1
Click the [Drive information] button.
The information of the drive that is connected to the Sensor Controller is can be checked.
Reference: External Drive Names (p.223) and Using External Memory Devices (FH series/FZ5-1100
series only) (p.224)
Vision System FH/FZ5 Series
User's Manual (Z365)
Setting the Operating Environment of the System
6
293