Using Copy with Functional Limitations
This explains the steps for copying setting data when [Apply immediately] is checked.
1
Click on the setting data in the Before revision area you want to copy.
In the Description area, a description of the selected settings will be displayed.
2
Click [Copy]
3
In the After revision area check the settings that will be copied.
The [Paste] button will be grayed out in the following cases.
• If the same line as that selected for setting copy is checked.
• If the setting data type differs from that which is checked for Copy operation.
210
Changing settings for each line in Multi-line Random-trigger mode (Line Maintenance)
Vision System FH/FZ5 Series
User's Manual (Z365)