Omron FH-1 series User Manual page 34

Procedure
↓
In the Main Window (layout 0), edit the measurement flow.
• Register processing items.
• Set the properties for each processing item.
↓
Scene Editing
Click the [Data save] button.
↓
Execute test measurements.
(In the Main Window (layout 0), click the [Measure] button.)
↓
Adjust the parameters for each processing item.
↓
Testing
Click the [Data save] button.
↓
In the Main Window (layout 0), click the [Switch layout] button, and then
select [Main Window (Layout 1)].
↓
Measuring In the Main Window (layout 1), check the communications with the PLC.
(Operation)
↓
In the Main Window (layout 1), execute commands from the PLC, such as
measurement trigger commands.
↓
Management and
Save and analyze measurement data and images.
Analysis
32
Flow of Application
Description Reference
Reference: Setting Scenes
(Measurement Flows) (p.53)
Reference: Saving
Settings before Turning OFF
the Power and Restarting
(p.49)
Reference: Loading
Settings Data from the
Controller RAMDisk or an
External Memory Device to
the Sensor Controller (p.229)
Reference: Performing
Test Measurement/Starting
Operation (p.73)
Vision System FH/FZ5 Series
Processing Item Function
Reference Manual (Cat. No.
Z341)
Reference: Saving
Settings before Turning OFF
the Power and Restarting
(p.49)
Reference: Loading
Settings Data from the
Controller RAMDisk or an
External Memory Device to
the Sensor Controller (p.229)
Reference: Performing
Test Measurement/Starting
Operation (p.73)
Vision System FH/FZ5 Series
User's Manual for
Communications
Settings (Cat. No. Z342)
Vision System FH/FZ5 Series
User's Manual for
Communications
Settings (Cat. No. Z342)
Reference: Useful
Functions for Operation
(p.116)
Reference: Using Tools
(p.143)
Vision System FH/FZ5 Series
User's Manual (Z365)