Restoring Settings With Saved Settings Data - Omron FH-1 series User Manual

Restoring settings with saved settings data

Saved settings for a sensor controller can be restored, or copied.
This section explains the procedures for loading a sensor controller project with the Configuration copy function.
IMPORTANT
• Do not manually edit a file in a sensor controller project. Doing so will cause an error and the project will not be readable.
• Before loading a sensor controller's project, it is recommended to back up the setting of the Sensor Controller. If failure to
load a sensor project occurs, the sensor controller does not return to its previous state.
• When connecting an external memory device to the sensor controller, make sure that it is the same device to which the
sensor controller project was saved.
1
Connect the External Memory device to the Sensor Controller.
2
From the [Tool] menu, select [Configuration
Copy].
3
[Confirm] dialog box is displayed.
After confirming, please click [Continue] button. [Configuration copy tool] starts.
4
Click [Load] tab.
194
Backing up Sensor Controller setting data (Configuration copy) Vision System FH/FZ5 Series
User's Manual (Z365)