Omron FH-1 series User Manual page 93

Measurement Pane
This pane is for measuring and re-measuring. The following elements are displayed. There are no editable
elements.
•[Camera image meas.] tab page: [Measure] button
•[Image file meas.] tab page: [Selection image] button, [Re-meas.] button, [Auto Re-meas.] check box,
and the [Judgement result monitor] check box
•[Output] check box
•[Continuous meas.] check box
Flow Display Pane
This pane shows the measurement flow.
The following elements are displayed.
•[1st. NG unit] button
•[Next NG unit] button
•[ ] "Property setting" button
•Measurement flow list
• To Change the Size of the Flow Display Pane
Use the following procedure if the type of settings dialog box to display when you click a processing unit
icon is set to the Simplified Non-stop Adjustment Mode:
1
In Layout Modification Mode, click the
Display Pane.
2
The following settings dialog box is displayed. Set the following settings.
Editable items
Flow display size
Unit setting mode
Vision System FH/FZ5 Series
User's Manual (Z365)
Description [Factory default]
Sets the size of the Flow Display Pane. The unit is in pixels.
16 to 128, [48]
Specifies the type of item settings dialog box to display when you click on a
processing unit icon.
• [Normal]: Displays a normal settings dialog box.
• Simplified non-stop: Displays the Simplified Non-stop Adjustment Mode.
• Nothing: No settings dialog box is displayed.
icon in the upper right corner of the Flow
91
Arranging Windows
3