Omron FH-1 series User Manual page 271

The Multi-trigger Imaging processing item is the parent, and everything up to the Multi-trigger Imaging End
processing item is a child.
Additionally, the Multi-trigger Imaging Task processing item is the parent, and everything up to the step
just before the next
Multi-trigger Imaging Task processing item or the Multi-trigger Imaging End processing item is a child.
The Multi-trigger Imaging End processing item is not displayed in the list of items. (It is registered as a set
with the Multi-trigger Imaging processing item).

Precautions on Flow Editing
• Editing operations on Multi-trigger Imaging blocks and task blocks, such as register, move, delete, copy, and
paste, and unit save and load operations, are performed on the Multi-trigger Imaging block as a group.
• You cannot delete a Multi-trigger Imaging End processing item by itself. If it is deleted, an error dialog will be
displayed.
Setting parameters of Multi-trigger Imaging Processing Items
Follow the steps below to configure the parameters of Multi-trigger Imaging Processing Items.
1
In the Main Window (layout 0), select [Function] -
[Edit Flow].
2
Select the [Multi-trigger Imaging] to configure.
3
Click the [Settings].
4
Select the mode and set the time for timeout.
Vision System FH/FZ5 Series
User's Manual (Z365)
Multi-trigger Imaging Processing Function
6
269