Omron FH-1 series User Manual page 192

Editing a template
By editing a template before using it, it is possible to omit un-needed setting data.
Template editor screen
The settings for [Template editor] are explained here.
Item
Template's name
Button
Initialize
Create
Update
Delete
*1: The number of template that can be registered is 1 to 256.
Create a template
Describes the steps for creating a new template.
1
Select a template.
190
Backing up Sensor Controller setting data (Configuration copy)
Set value [Factory
default]
• [All]
• Common setting
• Line 0 + Common setting
• Line 0
When initializing the setting of a template, click [Initialize] button.
Available templates are [All], [Common setting], [Line 0 + Common setting] and [Line 0].
The data edited the template is initialized and can not be returned to the edited data.
Reference: Initialize a template (p.193)
(*1)
Create a new template.
Input a template's name and select the setting data, and then click [Create] button.
Reference: Create a template (p.190)
Without changing the template's name, the selection of setting data is changed.
Select the template and select the setting data, and then click [Update] button.
Reference: Updating a template (p.192)
Delete an unnecessary template.
Select the template and then click [Delete] button.
Deleted template can not be returned to the original.
Reference: Deleting a template (p.193)
A selected template is reflected by [Template's name].
When creating a new template, you can specify the template's name
using up to 256 characters.
The allowable number of characters is the same for double-byte and
single-byte characters.
Description
Description
Vision System FH/FZ5 Series
User's Manual (Z365)