Omron FH-1 series User Manual page 103

Vision sensor fh series; fz5 series
Hide thumbs Also See for FH-1 series:
Table of Contents

Advertisement

Changing the Display Ratio
When you use the FH series/ FZ5-1100 series, you can change the display magnification as follows:
• Change the display magnification on the Image Pane.
• Change the display magnification using the zoom icon of Image container window.
1
Click the zoom icon in the upper right
corner of the Image container window.
2
The zoom icon color is changed, and then the Display Ratio can be changed by using mouse
wheel.
The Display Ratio can be changed by using mouse wheel.
The Display Ratio can not be changed by using mouse wheel.
Note
• If there is a display magnification via mouse wheel capability, the following operation is usable.
• Double-clicking:
Change the doubled display magnification to fit the image widow size.
• Triple-clicking:
Displays the part of the window except the partially loaded margin.
Change the display magnification of the captured image except the margin according to the window size.
Image Mode List
You can change the following items on the Main Window (layout 0).
Item
The latest image is always loaded from the Camera and displayed.
Through
When a through image is selected, saved images cannot be called up for measurement.
The image that was scanned in the immediately preceding measurement is displayed. Images are
Freeze (default)
updated when measurements are performed.
The latest NG error image resulting from an overall judgement is displayed.
The latest measurement results are always shown in the overall judgement and measurement time.
Last NG
In this case, the overall judgement result and measurement time may conflict with the Camera image.
Also, during continuous measurements, the last NG image cannot be displayed.
IMPORTANT
• In the following cases, saved images cannot be called up for measurement.
When a through image mode is selected in unused Image pane.
• When you select [Through], the measurement start or display switch may be delayed.
Vision System FH/FZ5 Series
User's Manual (Z365)
Description
Arranging the Window Display
3
101

Advertisement

Table of Contents
loading

Table of Contents