Omron FH-1 series User Manual page 18


Alert statements in this Manual
The following alert statements apply to the products in this manual. Each alert statement also appears at the
locations needed in this manual to attract your attention.
This product must be used according to this manual or Instruction sheet.
Failure to observe this may result in impairment of functions and performance of the product.
This product is not designed or rated for ensuring safety of persons. Do not use it for such purposes.
Never connect the AC power supply with this product.
When the AC power supply is connected, it causes the electric shock and a fire.
A lithium battery is built into the Controller and may occasionally combust, explode, or burn if not
treated properly. Dispose of the Controller as industrial waste, and never disassemble, apply
pressure that would deform, heat to 100°C or higher, or incinerate the Controller.
Since camera that can be connected with this product emits a visible light that may have an adverse
effect on the eyes, do not stare directly into the light emitted from the LED. If a specular object is
used, take care not to allow reflected light enter your eyes.
Do not touch the terminals while the power supply is ON. Doing so may result in electrical shock.
Please take external safety measures so that the system as a whole should be on the safe side even
if a failure of a Sensor Controller or an error due to an external factor occurred. An abnormal
operation may result in serious accident.
Please take fail-safe measures on your side in preparation for an abnormal signal due to signal
conductor disconnection and/or momentary power interruption. An abnormal operation may result in
a serious accident.
Danger of burns. Do not touch the case while the LED is ON or just after power is turned OFF, since
it remains extremely hot.
16
WARNING
CAUTION
Vision System FH/FZ5 Series
User's Manual (Z365)