Troubleshooting - Omron FH-1 series User Manual

Troubleshooting

This section explains possible error messages that may be displayed while using Configuration Copy, as well as
possible solutions.
Errors that may occur when loading.
During the loading of a sensor controller's project, the following error message is displayed.
(example) Loading of settings data file failed.
To continue the loading of the Sensor Controller's project
Click [Continue] button.
Loading of the sensor controller will continue continuing, however, the settings data that caused the error
message to display will not be applied.
To cancel the loading of the sensor controller's project
4
Click [Cancel] button.
Loading of the sensor controller will stop. After stopping, you can refer to the troubleshooting list to find the
possible cause and solution for the problem.
After that, initialize the sensor controller, and then reload the sensor controller's project.
197
Vision System FH/FZ5 Series Backing up Sensor Controller setting data (Configuration copy)
User's Manual (Z365)