Omron FH-1 series User Manual page 143

IMPORTANT
Use only single-byte alphanumeric characters for the file names of files to send and receive with the FTP.
• If account, or password is needed for FTP connection, set them as follows
Account: anonymous
Password: Blank or half-width characters
• When you access to the external memory device except RAMDisk, refer to the following:
• M:\ (SD memory card): SDDisk
• E:\ (USB memory): USBDisk
• F:\ (USB memory): USBDisk2
• Cannot access to the external memory device, i.e. G drive, from FTP.
Note
• There are no limitations on when you can perform FTP file transfers.
• Processing of FTP file transfers does not affect the transaction time. However, It does affect the load on the network.
Saving Logged Data Directly to a Shared Folder on a Computer ([Network Drive Function])
The network drive function is useful when you need to log image data or measurement data directly to a
computer that is connected by Ethernet.
You can specify the shared folder on a computer that is connected by Ethernet as the destination for logged
images or logged data.
Direct reading and writing with the computer eliminates the need for reading and writing through external
memory devices. At the same time, it also eliminates the need to stop measurements to insert or remove the
external memory device.
Computer
Ethernet
FH Controller
Setting Up the Network Drive
Register the shared folder on a network drive with a shared name.
1
Select [Tool] menu − [System settings] − [Other] − [Network drive setting].
2
Select the shared name to be registered, and click [Edit].
3
Enter the information to be allocated to the network drive (shared name), such as the shared
folder, user name, and password.
4
The shared folder on the connected computer will appear in the [Select file/folder] dialog box.
Vision System FH/FZ5 Series
User's Manual (Z365)
Shared folder on computer
(the shared folder must be set up
on the computer)
• Logged images
• Logged data
Saving directly
Set the Controller to save to the
shared folder on the computer.
Useful Functions for Operation
3
141