Omron FH-1 series User Manual page 128

Note
• If logging errors occur, please check the following .
: Is the LAN cable connected properly?
: Are the destination server settings in system settings correctly set?
: Did you use any character other than single-byte alphanumeric characters for the file names or folder names?
• Measurement ID : measurement time YYYY-MM-DD_HH-MM-SS-XXXX
(YYYY: Calendar, MM: Month, DD: Day, HH: Hour, MM: Minute, SS: Second, XXXX: Millisecond and Line number)
Example
Measurement time: 11:10:25.500 AM, December 24, 2007 and Line 0, the measurement ID is "2007-12-24_11-10-25-5000".
Since the file name of the logging image also includes the same measurement ID, confirmation of the measurement
data and image data can be performed with the measurement ID.
7
Select the file type.
Set the file type to save image files.
Reference:
Setting item
File type
Quality
IMPORTANT
• If you save as BMP(BFZ)format /JPG(JFZ) format, the handling for the area outside the image differs from the IFZ file
format and emphasizes ease of display. If you want to perfectly reproduce the measurement processing, including error
processing on the outside part of the image, save it as IFZ file format.
• Do not change the name of any BMP/Jpeg included in the BMP(BFZ) file/JPG(JFZ) file type. Measurement may fail on this file type
when loaded.
• If there are camera image input numbers for the BMP format files included in the BMP(BFZ)/JPG(JFZ) file type that are
out of sequence, measurement will not be done on images after the first out of sequence number.
• JPG(JFZ) format can be read and measured with sensor controller software version 5.71 or later. Since it is an
irreversible compression image format, the measurement result differs from IFZ format, or BMP(BFZ) format.
Note
Differences among IFZ, BMP (BFZ) and JPG(JFZ) are as follows. Select the type depending on the intended use.
1. File type
• IFZ is an OMRON proprietary image file type. In order to confirm images in this file type, a Sensor Controller, or
custom tools are necessary.
• BMP(BFZ)/JPG(JFZ) is a standard bitmap/Jpeg format image file type. Images in this file type can be confirmed with
standard PC desktop image tools and without the need for any custom tools.
2. File size
• BMP(BFZ) is triple in size than IFZ file type when you save color images.
• JPG(JFZ) format file size varies depending on image quality.
• Conversion time differs when converts IFZ to BMP(BFZ)/JPG(JFZ) during loading/writing the BMP(BFZ)/JPG(JFZ)
files or due to savable images depending on differ of file size.
3. Compatibility
• Loading or measuring IFZ file type is applied to Sensor Controller's software version 5.30 or less and cognition of
multiple camera is also enable.
• Loading or measuring BMP(BFZ) file type is applied to Sensor Controller's software version 5.30 or less, however
processes same as one BMP image due to no multiple camera information.
126
Useful Functions for Operation
Image file (p.350)
Set value [Factory default]
• [IFZ]
• BMP(BFZ)
• JPG(JFZ)
• 0 to 100
• [100]
Description
Select the file type to save images for Logging.
IFZ: Save as an OMRON image logging file format for use
with FH/FZ series, or FQ series.
BMP (BFZ): Save as a container format image logging file
that includes BMP format image files.
JPG (JFZ): Jpeg format image files are organized in folders
when saved as a logging image file format.
Image quality settings for saving as JPG (JFZ).
Vision System FH/FZ5 Series
User's Manual (Z365)