Troubleshooting - Omron FH-1 series User Manual

Troubleshooting

PLC Master Calibration
Refer to Key Points for Adjustment under PLC Master Calibration in the Vision System FH/FZ5 Series
Processing Item Function Reference Manual (Cat No. Z341).
Vision Master Calibration
Refer to Key Points for Adjustment under Vision Master Calibration in the Vision System FH/FZ5 Series
Processing Item Function Reference Manual (Cat No. Z341).
Calibration Support Tool
Symptom
The unit number is set to
[None] and cannot be
selected.
The setting data is initialized
every time the Toolbox is
opened.
How do you rotate the
graphic display for better
visibility?
308
Alignment
Type Parameters to adjust
---
• Tool Settings Save
Button
• Tool Settings Load
Button
• Standard axis
• Axis direction
• Direction of rotation
Correction
Check whether there are any processing items that
retain calibration data that are registered in the current
scene.
This is the specified behavior. If you need to save the
settings data, use the [Save] button in the Toolbox. The
saved settings can be loaded with the [Load] button.
You can rotate the graphic display along the standard
axis, axis direction, and rotation direction on the [Display
setting] tab page.
Vision System FH/FZ5 Series
User's Manual (Z365)