Omron FH-1 series User Manual page 218

2
Click the [Data save] button to save the settings, and then restart the Controller.
3
Set the IP address.
In the Main Window, select [System settings]
− [Communications] − [Ethernet (*****)] from
the [Tool] menu, and then set the IP address.
*1: The "(*****)" shows the [Serial (Ethernet)] setting
that was set in [Communications] in step 1
above.
Next, specify the IP address of the remote
operation PC.
Open the local area connection properties on
the remote operation PC.
Enter the IP address.
216
Remotely operating the controller (Remote Operation) Vision System FH/FZ5 Series
User's Manual (Z365)