Omron FH-1 series User Manual page 159

3
Set each item in the [External memory device settings] area.
Variable name
External memory
device settings
4
Click [OK].
The scene group storage location is changed, and the current scene group data is transferred from the
current storage location to the new storage location. An error message is displayed if the transfer fails.
IMPORTANT
• An error message is displayed if scene group data storage or reading fails. See "Error Messages and Troubleshooting" in
the Appendices for descriptions of error messages.
Reference: Error Messages and Troubleshooting (p.317)
• When the scene group data storage location setting is changed, a file with the [*.scg] file extension is created at the new
storage location. Do not change the file name or file extension of this scg file. If you change, the setting will not be saved
or read correctly.
• When you change the Scene group save destination, the original data in the save destination will be deleted. The data in
the original save destination will be deleted. Make sure to back up data for use in case of malfunction, or corrupted data.
Note
• You can check the available capacity of external memory in the setting screen. We recommend that you check whether
your external memory has enough available capacity before changing the storage location.
• Clicking [Restore the defaults] restores the settings to their factory default values.
Factory default settings differ as follows:
• FZ5-L series/FZ5-600 series:
Scene group 0 is stored in the Sensor Controller's flash memory.
Scene groups 1 and after are stored in external memory.
• FH series/FZ5-1100 series:
Scene group 0, Scene group 1, and after are stored in the Sensor Controller's flash memory.
Vision System FH/FZ5 Series
User's Manual (Z365)
Set value [Factory default]
---
Saving Scene groups in external memory (Scene Group Saving Destination settings)
Content
This setting is valid when [Save all scene group data in the
external memory device] or [Save after the next scene
group data in the external memory device] is selected for
[Scene Group Saving Destination Setting].
Used to set the storage location folder.
4
157