Saving Settings Data To The Controller Ramdisk Or An External Memory Device - Omron FH-1 series User Manual

Saving Settings Data to the Controller RAMDisk or an External Memory Device

Setting data files are saved to the RAMDisk or to an external memory device. The following table lists the data
that can be saved.
Data
System data (*.ini)
Scene data (*.scn)
Scene group data (*.sgp)
System + Scene group 0 data (*.bkd) Indicates both system data and Scene group 0 data.
IMPORTANT
• Do not try to restart, turn OFF the power source, or remove the external memory during saving data. Data may be
corrupted and will not be perform correctly next launching. In particular, when the target data of [Data save] is System
+Scene group 0 as it is saved to the flash memory of Sensor Controller simultaneously.
• If the software version to load is not older than the software version which is saved the setting data, it possible not to be
loaded the setting data file.
Note
When [Save to file] is executed, the data to save is also saved in the Controller (except scene group data 1 to 31).
1
To save to a USB memory device (or an SD memory card), insert the USB memory device (or
SD memory card) in the Controller.
2
In the Main Window, select [Save to file] from the [Function] menu.
The [Save to file] dialog box is displayed.
3
Click the [Setting data] button to select
the data to save.
4
If you selected [Scene data], click the
[] button to select the number of the
scene to save.
5
Specify the destination folder and file
name.
6
Click [OK].
The dialog box showing transfer status is displayed, and the data is sent to the save destination.
226
Saving Settings Data to the Controller RAMDisk
or an External Memory Device
Indicates the shared setting data, i.e. [System] menu.
Indicates each setting data, i.e. unit setting value, Scene order, layout or size of Image
Pane.
Indicates data including 128 Scene.
Description
Vision System FH/FZ5 Series
User's Manual (Z365)