Setting Operation Mode [Startup Settings] - Omron FH-1 series User Manual

IMPORTANT
• If the Touch Panel cable (USB or RS-232C) is accidentally slipped out during FH series Sensor Controller is
running, cannot operate the Touch Panel even if you try to re-connection the cable. For continue to operation or
perform, connect a wired USB mouse which is not need to install driver.
• To re-operate the Touch Panel, confirm the connection Touch Panel Monitor FH-MT12 and FH series Sensor
Controller, and then retry to initiate the Sensor Controller.
Note
For detail of OSD (On-screen display), refer to

Setting Operation mode [Startup Settings]

Select the operation mode according to the application conditions, such as the operation mode that is best
suited to reduce the takt time and downtime.
Refer to Setting the Operation Mode (p.238) for details on the operation modes.
Item
Operation mode
Parallel
execution
1
Click the [Apply] button.
284
Setting the Operating Environment of the System
Set value [Factory default]
• Double Speed Multi-input
• [Standard]
• Multi line random trigger
• Non-stop adjustment
ON/[OFF]
Model FH-MT12 Touch Panel Monitor INSTRUCTION SHEET.
Set the operation mode.
Reference:
Mode (p.238)
Set whether to uses parallel processing.
Reference:
Settings (Automatic Parallelization)
(p.253)
Description
Setting the Operation
Parallel Processing
Vision System FH/FZ5 Series
User's Manual (Z365)