Omron FH-1 series User Manual page 123

Data Logging
• System Logging
Data logging does not have a system logging function. Use a Data Logging processing item.
• Processing Item Logging
For those Processing items that include logging function, Data Logging is available.
To enable processing item logging, register the processing items in the measurement flow.
If there is more than one data logging unit in the measurement flow, data logging is performed based on
the logging conditions for the most recently executed data logging unit.
IMPORTANT
• If you use logging, the measurement processing time will take longer for the time required for the logging process. If you
need to continuously execute measurements that include image logging, allow enough time between measurement
triggers after the first trigger to allow time for image processing.
Reference: Calculating the Measuring Interval ([Logging]) (p.130) for information on measuring the time for image
logging processing.
• Processing item image logging and system image logging cannot be used at the same time.
If you prefer to use the Image Logging processing item, click [System Settings] − [Other] − [Logging setting] − [Image
logging], and then select [None].
• If you prefer to use the Data Logging processing item, click [System settings] - [Other] - [Logging setting] - [Data Logging]
and configure the logging conditions.
This section describes system logging in detail.
Refer to the Vision System FH/FZ5 Series Processing Item Function Reference Manual (Cat No. Z341) for
information on processing item logging
The processing items that can be logged are described below.
Image Conversion Logging
This logging saves Camera images.
Image conversion logging allows you to draw a rectangle around a portion of the image to save. You can also
specify the format of the saved image (BMP or JPG).
Data Logging
Measurement data is saved.
Vision System FH/FZ5 Series
User's Manual (Z365)
Useful Functions for Operation
3
121