Setting The Operating Environment Of The System; Selecting Language [Startup Settings] - Omron FH-1 series User Manual

Setting the Operating Environment of the System

This section describes how to set the operating environment of the Controller. The following settings are
available.
• Reference: Selecting Language [Startup Settings] (p.277)
• Reference: Setting the Status at Startup [Startup Settings] (p.278)
• Reference: Setting Communication [Startup Settings] (p.280)
• Reference: Setting Operation mode [Startup Settings] (p.284)
• Reference: Date-time setting [Other] (p.285)
• Reference: Fan control setting [Other] (p.285)
• Reference: STEP setting [Other] (p.286)
• Reference: Encoder trigger setting [Other] (p.287)
• Reference: Network drive setting [Other] (p.289)
• Reference: Error Setting [Other] (p.291)
Confirmation of Sensor Controller's model or Measurement application version.
• Reference: Checking System Information [System Information] (p.293)
Note
For communication setting with PC or Programming controller, refer to the chapter of Methods for Connecting and
Communicating with External Devices in the FHFZ5_UM Communications Settings (Z342-E1-05).

Selecting Language [Startup Settings]

You can set the language to use for the characters displayed on the displays. Information about the application
software will be displayed in the selected language.
Note
• When a Controller with default settings is started, the [Language setting] dialog box is automatically displayed.
• The Controller default setting is for Japanese-language displays. If the language setting is changed to a non-Japanese
language, the system automatically restarts.
1
In the Main Window, select [System settings] − [Startup] − [Startup setting] − [Language
Setting] from the [Tool] menu.
The [Language setting] dialog box is displayed.
2
Click the [] button to select the
language.
3
Click the [Apply] button.
4
Return to the Main Window and click the
[Data save] button. Then, restart the
Controller. The Controller will start up
with the selected language.
Note
The [Language setting] dialog box is also displayed when restarting after executing [System initialization].
Vision System FH/FZ5 Series
User's Manual (Z365)

Setting the Operating Environment of the System

6
277