Increasing The Number Of Scenes In A Group To More Than 128 Scenes (Conversion Scene Group Data Tool) - Omron FH-1 series User Manual

Increasing the number of scenes in a group to more than 128 scenes (Conversion scene group data tool)

You can increase the number of scenes in a scene group to more than 128 scenes.
To start the Conversion Scene Group Data Tool, select [Conversion scene group data tool] from the [Tool] menu.
Overview
Normally, there are 128 scenes in a scene group.
For example, if you need to create scenes for each model and there are more than 128 models, you would
normally create more than one scene group to manage the scenes.
However, you can use the Conversion Scene Group Data Tool to increase the number of scenes in a scene
group to up to 1,024 scenes. A scene group data file (extension *.sgp) is used as the target data.
The ability to manage all of the scenes in one scene group even if there are more than 128 scenes simplifies the
PLC control programming and data management.
IMPORTANT
If you increase the data size of a scene group, you may not be able to save the data in the Controller or load the data from
a file, depending on the number of scenes and the settings.
If that occurs, change the measurement flow, separate the scene group, or otherwise reduce the data size of the scene
group.
Note
For best results, organize the scenes in the scene groups before you use the Conversion Scene Group Data Tool. For
example, arrange the scenes in the proper order, delete unnecessary scenes, and assign scene names.
Reference: Editing Scenes (p.68)
Operating Procedure for the Conversion Scene Group Data Tool
When you start the Conversion Scene Group Data Tool, the following dialog boxes are displayed in order.
You complete the following three dialog boxes as a progressive process that sets, edits, and converts the scene
group data.
Step 1: Set the target data to convert.
Step 2: Edit the data.
Step 3: Execute the conversion process.
Vision System FH/FZ5 Series

Increasing the number of scenes in a group to more than 128 scenes (Conversion scene group data tool)

User's Manual (Z365)
4
177