Omron FH-1 series User Manual page 109

Note
To save the settings individually, click the [Save to dialog settings file] button (
saved file can be loaded with the [Load dialog settings file] button (
Settings in the Dialog Box Properties Display Area
Common Settings Area
Parameter
Dialog ID
Dialog title
Dialog kind
Display target scene No. [Scene 0]
Display target unit No.
IMPORTANT
If you change the measurement flow after you create a custom dialog box, change the target unit number to match the
edited measurement flow.
Individual Setting Region
• Normal Dialog Box Setting Region
Parameter
Dialog width
Dialog height
• Region Setting Dialog Box Setting Region
Parameter
Setting target figure No. [0]
Vision System FH/FZ5 Series
User's Manual (Z365)
Set value [Factory default]
The dialog box ID is set to a
character string that is not
assigned to any other dialog
box.
A title that is based on the
dialog box type is assigned.
---
This is set to the unit that can
be selected from the display
target scene.
Set value [Factory default]
100 to 1920
[1024]
100 to 1080
[768]
Set value [Factory default]
).
Description
The ID for the dialog box.
To change the ID, click the [...] button and enter the desired
characters.
The title for the dialog box. This appears in the title bar when the
custom dialog box is displayed.
To change the title, click the [...] button and enter the desired
characters.
The dialog box type is displayed.
This specifies the number of the scene for which to display the
dialog box.
This specifies the number of the unit for which the dialog box is
to be displayed instead of the default settings dialog box.
The unit that can be specified depends on the type of the dialog
box.
Immediately after the dialog box is added, the unit with the
lowest unit number out of the display target units in the display
target scene is selected.
If there is no display target unit, unit 0 is selected.
Description
Sets the width of the dialog box.
Sets the height of the dialog box.
Description
Specifies the figure number for the unit to use for region
setting. The number that you can select depends on the unit
that is specified.
) to save the settings to a file. The
Custom Dialogs
3
107