Omron FH-1 series User Manual page 98

Error Pane
This pane shows errors, such as Camera connection errors.
If you add an Error Pane to a layout and an error occurs that normally causes an error dialog box to appear,
an error string will appear in the Error Pane.
This is useful for remote operation or situations where an error dialog box would be difficult to close.
The latest error string (error message) is displayed on the top line of the error pane.
Also the error pane can display the error messages of up to 100.
The Error Pane is assigned to layout 8 by default.
Note
The Error Pane displays error messages for the following errors.
• System errors
• Fan or voltage errors
• Camera connection errors
• Changes made to the connected Camera
• Camera overcurrent detected
• Image logging disk write errors
• Output control timeout errors (parallel I/O, PLC Link, or EtherNet/IP)
• PLC Link communications errors
• Parallel I/O overcurrent detected
• Settings data load errors
• Settings data transfer errors
• Output timeouts (EtherCAT)
• Output buffer errors (EtherCAT)
• Clearing the Error Display
1
In the state where you have exited layout modifications, click the upper left corner of
the Error Pane.
Click the upper left corner.
2
The following dialog box is displayed. Click the [Clear] button.
3
Click the [Close] button on the settings dialog box to close the dialog.
96
Arranging Windows Vision System FH/FZ5 Series
User's Manual (Z365)