Network Drive Setting [Other] - Omron FH-1 series User Manual

Network drive setting [Other]

You can save logging images to an external device, such as a network-connected computer with a shared folder,
using a network drive.
You can also load setting data saved in a network drive into the Controller.
If you register a shared folder on the network drive, the network drive connected to the [Select file] or [Select
folder] dialog box of the FH/FZ5 software will be displayed.
1
Click [Tool]-[System settings]-[Other]-[Network drive settings].
2
Click [Reconnect] if you want to reconnect Network drive, Click [Edit] if you want to edit it.
For [Reconnect] and [Edit], refer to as followings.
About [Reconnect]
To click [Reconnect], you can reconnect the Network drive without restarting the Sensor Controller.
For example situations of [Reconnect], refer to as followings.
• Network drive communication is filed at Sensor Controller's startup.
• Network drive communication is disconnected while Sensor Controller is running.
• Network drive is changed while Sensor Controller is running.
Setting procedure of [Reconnect] is as followings.
1
Select Network drive that you want to
reconnect.
2
Click [Reconnect].
IMPORTANT
• Click [Reconnect] after completion of saving or loading of Network drive.
If you click [Reconnect] while the Network drive is running, the network drive file may be corrupted.
• Make sure to do the following when changing the User name and Password of a network drive on the FZ5-L series/FZ5-
600 series.
1. Click [Shared folder], [User name], and [Password]. Then click [Reconnect].
Note that the Reconnect will fail in this time.
2. Enter new [Shared folder], [User name], and [Password].
3. Click [Reconnect] again.
Vision System FH/FZ5 Series
User's Manual (Z365)
Setting the Operating Environment of the System
6
289