Omron FH-1 series User Manual page 200

Troubleshooting list
message
An error message occurred
because the Sensor
Controller's project cannot be
saved.
An error message is occurred
because loading of the Sensor
Controller's project failed.
"File writing failed."
An error message is occurred
because loading of the Sensor
Controller's project failed.
"File destination is not exist."
Change screen of the save
destination setting for Scene
grope is displayed.
198
Backing up Sensor Controller setting data (Configuration copy)
Cause
Save destination is not set.
Name of the Sensor Controller's
project is not entered.
An empty capacity of the external
memory is insufficient.
Insufficient free memory in Sensor
Controller
External memory is not plugged in.
Sensor Controller's project files is
corrupted.
Sensor Controller's project which
saved via FH series/FZ5-1100 series
is loaded via FZ5-L series/FZ5-600
series.
External memory is not plugged in.
Drive name of external memory
differs from the Sensor Controller
project.
Sensor Controller project saved via
FH series/FZ5-1100 series.
Model type is different from saved
Sensor Controller and loading one.
Connected storage configuration
differs.
Action
Set the save destination.
Enter the Sensor Controller project name.
• Change to external memory device with larger
memory capacity.
• Delete the unnecessary files.
Resave to the Sensor Controller after increasing free
memory space by deleting Scenes, or Processing
units, adjusting the measurement region of
Processing unit, or registered model size.
Plug in the external memory.
• Power was possibly turned off during last save
operation.
• Insufficient memory can occur due to increased
memory requirement for current Operation mode.
Save destination of Scene group can be differ if the
created environment and loading environment are
different.
Set the save destination.
Plug in the external memory.
Set the save destination.
Save destination of Scene grope can be differ if the
created environment and loading environment are
different.
Set the save destination.
Save destination of Scene grope can be differ.
Reset the save destination.
Vision System FH/FZ5 Series
User's Manual (Z365)