Changing Settings For Each Line In Multi-Line Random-Trigger Mode (Line Maintenance); Before Use Of Line Maintenance - Omron FH-1 series User Manual

Changing settings for each line in Multi-line Random-trigger mode (Line Maintenance)

This tool can be used in Line 0 in Multi-line random-trigger mode to copy line settings for one line to other lines.
It can also clear settings.
This function is only for Multi-line Random trigger mode.
IMPORTANT
• Launch the Line Maintenance tool from Line 0. It cannot be launched from other lines (1-7).
• System setting data from line 0 can be copied to lines 1-7, but the opposite, copying System setting data from lines 1-7to
line 0 is not possible.
Note
For copying, or clearing line-specific scene data, or scene group data, select Line Maintenance from the Function menu.
Reference: Editing Scenes (p.68)

Before use of Line Maintenance

There are two types of settings data that can be configured with the Line Maintenance tool, Line-specific settings
data and sensor controller settings common to all lines. Line-specific settings data can be copied and cleared.
Sensor Controller settings common to all lines can be cleared.
The setting data of
the line.
Sensor controller
settings common to
all lines
Vision System FH/FZ5 Series
User's Manual (Z365)

Changing settings for each line in Multi-line Random-trigger mode (Line Maintenance)

4
199