Commissioning
Requirements for commissioning
Help for the operation and for the functions of the commissioning tools:
● STARTER videos
● Startdrive tutorial (http://support.automation.siemens.com/WW/view/en/73598459)
Commissioning with STARTER is described in the following.
4.1
Commissioning with STARTER
Creating a STARTER project
Procedure
In order to create a new project, proceed as follows:
1. In the STARTER menu, select "Project" → "New...".
2. Specify a name of your choice for the project.
You have created a new STARTER project.
CU250S-2 Control Units
Compact Operating Instructions, 05/2014, A5E32899990B AB
(http://www.automation.siemens.com/mcms/mc-drives/en/low-voltage-
inverter/sinamics-g120/videos/Pages/videos.aspx)
Use one of the PC tools STARTER or Startdrive to commission
the inverter.
You can access the inverter with STARTER or Startdrive either
via a USB connection or via the fieldbus.
System requirements and download:
• STARTER
(http://support.automation.siemens.com/WW/view/en/26233
208)
• Startdrive
(http://support.automation.siemens.com/WW/view/en/88851
265)
4
15