Display Nqa History - HP 6125XLG Command Reference Manual

Parameters
port-number: Specifies the destination port number of the operation, in the range of 1 to 65535.
Examples
# Configure the destination port number of the UDP echo operation as 9000.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type udp-echo
[Sysname-nqa-admin-test-udp-echo] destination port 9000

display nqa history

Use display nqa history to display the history records of NQA operations.
Syntax
display nqa history [ admin-name operation-tag ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
admin-name operation-tag: Displays the history records of an NQA operation. The admin-name
argument represents the name of the administrator who creates the NQA operation, and is a
case-insensitive string of 1 to 32 characters. The operation-tag argument represents the operation tag,
and is a case-insensitive string of 1 to 32 characters. If these two arguments are not specified, the
command displays the history records of all NQA operations.
Usage guidelines
The display nqa history command does not display the results or statistics of UDP jitter and voice
operations. Use the display nqa result command or the display nqa statistics command to verify the UDP
jitter and voice operations.
Examples
# Display the history records of the NQA operation with the administrator name administrator and the
operation tag test.
<Sysname> display nqa history administrator test
NQA entry (admin administrator, tag test) history records:
Index
10
9
8
7
6
5
4
3
Response Status
329 Succeeded
344 Succeeded
328 Succeeded
328 Succeeded
328 Succeeded
328 Succeeded
328 Succeeded
328 Succeeded
Time
2007-04-29 20:54:26.5
2007-04-29 20:54:26.2
2007-04-29 20:54:25.8
2007-04-29 20:54:25.5
2007-04-29 20:54:25.1
2007-04-29 20:54:24.8
2007-04-29 20:54:24.5
2007-04-29 20:54:24.1
118